Raptor RP4325

Raptor RP4325

42.5″ (108 cm) Primary Control Monitor

The Raptor RP4325 is the first 4K x 2K primary control monitor developed specifically for ATC. It features optimal use with 4K resolution, a sleek cabinet design, operational reliability, and customer-driven customization.

 

Περιγραφή Προϊόντος

10 + Years of Primary Control Monitor Manufacturing

EIZO has been an industry leader in the innovation and development of quality 2K primary control monitors for ATC since 2005. Backed by over 45 years of technical expertise in visual display solutions, the Raptor RP4325 is the industry’s first 4K x 2K monitor developed specifically for ATC. It combines the features of EIZO’s line of primary control monitors while adding further value with 4K resolution, unique functionality, and operational reliability.

Optimal Use

4K x 2K High Resolution

Display 4K x 2K high resolution data in full on one screen without the obtrusive bezels typically found in a multi-monitor workstation. 2K x 2K and auxiliary information can also be displayed simultaneously on a single screen, allowing controllers to view more information easily in one place.

Simultaneous Input Signals

The Raptor RP4325 can display input from up to three video sources simultaneously. Users can freely position each screen for a highly customizable layout.

Resolution Scaling

The Raptor RP4325 supports resolution scaling for each of its video inputs. Any non-native resolution can be displayed in its actual size, scaled proportionately, or expanded to fill the screen.

Wide Brightness Range

The monitor can be adjusted within a wide brightness range of 25 to 500 cd/m2 to suit your environment as well as the needs of the ATCO.

Brightness Stabilization

EIZO’s fully automated stability function uses an internal backlight sensor to stabilize the brightness level througout the life of the monitor, compensating for fluctuations caused by variations in ambient temperature and the passage of time.

 

Design

Slim Bezels

The unobtrusive bezels measure just 24 mm on the sides so ATCOs can focus more on the screen.

Protection Glass

Protection glass is optional and covers the visible part of the LCD panel for increased reliability.

Rounded Corners

The monitor’s design features rounded corners and edges for a pleasing and modern aesthetic.

Balanced Design

The monitor’s depth is designed to be minimal to bring the weight distribution close to the center of mass. This lowers stress on mounting fixtures over time. It weighs just 20.5 kg in consideration of the installation environment.

Mounting Flexibility

The monitor supports VESA mounting for conveniently installing in open or closed ATC consoles. A desktop version with a stand is also available as an option.

Durability and Reliability

24/7 Operation

The Raptor RP4325 is developed specifically for meeting the stringent requirements of mission-critical ATC environments with 24/7 operation.

Industrial-Grade Housing

The monitor’s housing uses full sheet steel industrial-grade housing for durability in demanding environments.

Fanless Operation

The monitor provides noiseless, fanless operation while still maintaining low heat output for reliability.

Built-In Power Supply

The power supply of the monitor is built in, freeing the installation space of an additional power brick and cabling. A secondary power supply is available as an option.

Extensive Customization

EIZO offers extensive customization in order to meet the specific needs of individual control centers.

Contact us to configure your monitor.
atc@eizo.com

Additional Features

Energy Efficiency

The monitor consumes up to just 125 watts at maximum brightness (500 cd/m2) and even less than that under typical operating conditions in control rooms. This saves energy and significantly reduces heat generation within the monitor, a leading cause of component failure.

Complete Connection

The monitor is equipped with two dual link DVI video signal inputs and two DisplayPort 1.2 inputs. It also comes equipped with a wide range of communication interfaces for connection to a network, remote monitor management, or maintenance purposes – RS232, USB, and TCP/IP.

Non-Intrusive Hardware Calibration

The monitor comes equipped with EIZO’s hardware calibration functionality using an external luminance reader. Easily accessed through the OSD menu, calibration of the backlight brightness, gamma, and white point can be carried out in just minutes. No additional software is needed, ensuring calibration operation is non-intrusive to your system.

Cabinet Color Black
Panel  
Type VA
Backlight Edge-type LED backlight system
Size 42.5″/ 108 cm
Native Resolution 3840 x 2160 (16:9 aspect ratio)
Viewable Image Size (H x V) 941.2 x 529.4 mm
Pixel Pitch 0.245 x 0.245 mm
Grayscale Tones 256 tones
Display Colors 16.7 million
Viewing Angles (H / V, typical) 178°, 178°
Brightness (typical) 500 cd/m2 (maximum)
25 cd/m2 (minimum)
Contrast Ratio (typical) 4000:1
Response Time (typical) 8 ms (Gray to Gray)
Video Signals  
Digital Scanning Frequency (H / V) 260 MHz (2 x 130 MHz dual link)) / 60 Hz
Power  
Power Requirements AC 100 – 240 V, 50 – 60 Hz
Maximum Power Consumption 100 – 125 W (Brightness: 500 cd/m2)

(Actual power consumption depends on active monitor functions.)

Typical Power Consumption 50 – 70 W (Brightness: 150 cd/m2)

(Actual power consumption depends on active monitor functions.)

Standby Mode 10 W or less
Features & Functions  
Brightness Stabilization Yes
Communication Interface RS232, USB-1 / USB-2 (Type A) , USB-1 (Type B), TCP/IP
Communication Protocol SNMP, HTTP, HID, Modbus/TCP
Physical Specifications  
Dimensions (Landscape, W x H x D) 992 x 613 – 673 x 322.9 mm
Dimensions (Without Stand, W x H x D) 992 x 588 x 93.4 mm
Net Weight 26.2 kg / 57.8 lbs
Net Weight (Without Stand) 20.5 kg / 45.2 lbs
Tilt 25° Up, 0° Down
Swivel 172° Right, 172° Left
Hole Spacing (VESA Standard) 400 x 200 mm
Environmental Requirements  
Operating Temperature 0 – 40 °C / 32 – 104°F
Operating Humidity (R.H., non condensing) Max. 90% (no condensation)
Storage Temperature -20 – 60 °C / -4 – 140°F
Degree of Protection IP20
Certifications & Standards (Please contact EIZO for the latest information.) CE, UL, FCC, REACH, RoHS, WEEE
Warranty Two Years